> How to install Scrap Metal Steel Baling Press Machine?

For small baler , we will not disassemble it when shipping, you just need to add hydraulic oil and connect to the electrical power, then operate per user manual, that is OK, for bigger one, we will make detail marks when disassembling the machine, you just only need to assemble the machine per marks, that is alright; and you can contact with our technical team when you have any problems.
    

> What is cooling system of Tcm Cans Tins Baling Machine?
Normally speaking, for the cooling of baler, we have 2 types of cooling system, one is water cooling, this cooling system is economical and easy to achieve cooling effect, and another type is industrial chiller which have better cooling effect than waste cooling, oil chiller cover small space, but price is just a little high than water cooling.
    

> What is warranty time of the Metal Scrap Baling Machine In India?
The warranty time of the baler machine is 12 months normally, also can you can pay extra fees for more times such as 24 months or 36 months, within the warranty time, we are responsible for the baler machine except the spare parts.
    

> How about shipping fees for Hydraulic Baling Press Machine For Stainless Steel?
The shipping fees are different, it depends on what kind of baler will you need and which destination port will arrive at, for small baler, will use LCL Shipment and the shipping fees will be lower; for big baler machine, will use full container, the fees will be higher, In a word, the shipping fees are different according to different destination port and different model of baler, will send you details shipping fees after checking with our forwarder, or you can check with your own forwarder.
    

> How do I choose the right Used Hydraulic Scrap Metal Baling Machine for my business?
Please check below factors: 1. Analyze Your Scrap Material: What is the primary metal? This is the most important factor. The type of metal you process determines the machine's power and type. 2.Calculate Your Volume and Throughput: How much scrap do you generate, and how fast? 3.Define Your End Goal: What do you want to achieve? 4.Evaluate Your Operational Constraints: Be realistic about your facility and budget, you will choose the right baler by following above steps.
   

> Does the installation of Tinplate Scrap Shear Baler require drilling and bolting into the floor or can stand without drilling?
Regarding the drilling or not, it depends on the type of baler, for vertical baler machine, most of vertical baling machine needs drilling and bolting, because it is vertical type, and weight center of the machine is high; and for horizontal baler, it no need foundation, drilling and bolting, just put it on horizontal cement ground with thickness more than 150mm.