> How much price of Copper Turning Scrap briquetting Pressing Machine?

Price of the briquette press is different, depends on how big of the machine is,and will give you details quote according to your materials and output capacity,  but we can give you a word that our price of the machine is lower with high quality.

> Before shipment, Could you please take testing video of Bronze Swarfs block making machine?

Yes, of course, we not only take videos of baler running before shipment, we will provide a production plan for you before manufacturing, and take videos, photos of the process of manufacturing according to the production plan to let you know the status of producing baler process clearly.

> What briquette size does the Copper Powder briquetter produce?

We can customize the briquette diameter size per your requirement, also you can tell us your requirement, we can suggest you suitable bale size accordingly.

> How can we install the China Scrap Brass Powder Briquette Machine?

The briquette press is marked tips when shipping, and you can easily assemble the machine per the tips, after assembling, put it on the horizontal ground, adding hydraulic oil, connect to the power supply, then test and operate the machine per user manual, that is OK, if you have any questions, you can contact with us any time.

> How does Stainless Steel Swarf Briquette Press work?

The briquette press is driven by hydraulic power to press all kinds of ferrous and non ferrous metal scrap chips into high density bale, easy to transport, save labor cost and storage cost, improve melting rate and make more profits.

> What are common maintenance issues with Iron Chip Briquetting Machine?

The common maintenance issues for the briquette press listed as below: 1. Clear the area of bale out every day, Inspect if have materials on the limit switch, if yes, please clear the materials, Clear the area around the machine every day, Inspect if any oil leakage from connects or cylinders.; 2. Week Inspection, Inspect all the connects and watch if loose or not, if loose, please tighten the connects timely, Inspect all the screws and watch if loose or not, if loose, please tighten the screws timely，Inspect if have materials on the piston rod, if have, please remove timely, Inspect the oil level and watch if it is on the indicated position; 3.Annual Inspection, Filter the hydraulic oil within 6 months from the beginning of the machine running, Change or filter the hydraulic oil every year, Clear the oil tank totally every year, Use sieve with more than 100 mesh when filtering the hydraulic oil.

> What is warranty time of the Brass Chips briquetter?

The warranty time of the baler machine is 12 months normally, also can you can pay extra fees for more times such as 24 months or 36 months, within the warranty time, we are responsible for the baler machine except the spare parts.