> What is warranty time of the Automatic Baling Press Machine For Metallic Scrap?

The warranty time of the baler machine is 12 months normally, also can you can pay extra fees for more times such as 24 months or 36 months, within the warranty time, we are responsible for the baler machine except the spare parts.

> How to choose your Iron Tin Baler correctly?

As for this issues, first, you need to know which model of the baler will you need, then you can compare price, quality, services of the baler machine from different suppliers, and at last you will know which supplier is better.

> Is it automatic or Manual control for Steel Scrap Scrap Pressing Machine? 

The baler has automatic control and manual control, the manual control is used to debug the machine when the baler machine arrived at your place, and the machine will run in automatic control when normal working, and that will be more efficient in automatic control.

> What are common maintenance issues with Hydraulic Scrap Baling Press Machine Stainless Steel？

The common maintenance issues for the baler listed as below: 1. Clear the area of bale out every day, Inspect if have materials on the limit switch, if yes, please clear the materials, Clear the area around the machine every day, Inspect if any oil leakage from connects or cylinders.; 2. Week Inspection, Inspect all the connects and watch if loose or not, if loose, please tighten the connects timely, Inspect all the screws and watch if loose or not, if loose, please tighten the screws timely，Inspect if have materials on the piston rod, if have, please remove timely, Inspect the oil level and watch if it is on the indicated position; 3.Annual Inspection, Filter the hydraulic oil within 6 months from the beginning of the machine running, Change or filter the hydraulic oil every year, Clear the oil tank totally every year, Use sieve with more than 100 mesh when filtering the hydraulic oil.

> What is pressing force of Stainless Steel Packaging Machine?

The pressing force of the  baler is different depends on different models, smaller machine has small pressing force, and bigger machines has big pressing force; and it is also determined by the material characteristics and bale density, our technical team will figure out and calculate the pressing force according to your requirements.

> Does the installation of Aluminum Can Baler Unites States require drilling and bolting into the floor or can stand without drilling? 

Regarding the drilling or not, it depends on the type of baler, for vertical baler machine, most of vertical baling machine needs drilling and bolting, because it is vertical type, and weight center of the machine is high; and for horizontal baler, it no need foundation, drilling and bolting, just put it on horizontal cement ground with thickness more than 150mm.

> What are the different types of Heavy Duty Metal Scrap Press baler?

The baler has many types such as horizontal type, vertical type, front forward-out type, side turn-out type, side push-out type, two rams shear type, triple rams big chamber type, heavy duty type, we have different types of baler according to your materials and output capacity.

> How can i know you are a manufacturer or trader of Spring Steel Wire Baler machine?

 You can visit our factory personally, also you can ask technical drawings such as 2D drawings 3D Drawings, we have professional technical team working on this, and will not give you these if a trader, because they don't have ability on this.

> What profits can we get from the Hydraulic Press Compactor Cube bale press machine?

You need to know price of metal scrap, and price of the bales you sell to metal recycling center or steel manufacturer, then you can know how much profits you will get by the baler.