> What is wall thickness of Non Ferrous Metal Scrap Baler Press Machine?

The wall thickness of the baler is different, big pressure force will use more thick wall thickness, and will use small thickness of steel plate for small pressure force accordingly, for example, 100tons pressure force will use 12mm, and for 315tons or more big pressure force will use 30mm or 50mm, except the wall steel plate, there is also a 12mm thickness of wear plate which is lined inside of the wall steel plate to promise the baler machine durable and stable.
    

> Which country have you exported the Used Hydraulic Scrap Metal Baling Machine?
We have exported the baler to many countries such as  Japan, Thailand, Malaysia, Singapore, Indonesia, India, Pakistan, Sri Lanka, Iraq, Iran , Qatar, Kuwait, Oman, Turkey, Finland, Sweden, Norway, Iceland, Denmark, Russia, Poland, Czech, Germany, Austria, Britain, Ireland, Netherlands, Belgium, France, Greece, Romania, Bulgaria, Albania, Slovenia, Croatia, Italy, Spain, Portugal, Egypt, Chile, Argentina, Ecuador, Canada, America, USA, Australia, New Zealand, South Africa, Mexico and other countries, approx. more than 100 countries.
    

> What are common maintenance issues with Triple Hydraulic Scrap Metal Compress Baling Press？
The common maintenance issues for the baler listed as below: 1. Clear the area of bale out every day, Inspect if have materials on the limit switch, if yes, please clear the materials, Clear the area around the machine every day, Inspect if any oil leakage from connects or cylinders.; 2. Week Inspection, Inspect all the connects and watch if loose or not, if loose, please tighten the connects timely, Inspect all the screws and watch if loose or not, if loose, please tighten the screws timely，Inspect if have materials on the piston rod, if have, please remove timely, Inspect the oil level and watch if it is on the indicated position; 3.Annual Inspection, Filter the hydraulic oil within 6 months from the beginning of the machine running, Change or filter the hydraulic oil every year, Clear the oil tank totally every year, Use sieve with more than 100 mesh when filtering the hydraulic oil.
    

> What kind of wear steel plate does Iron Scrap Hydraulic Baler Press use?
The baler use China famous brand wear steel plate of NM450 or NM500, the NM 450 wear steel plate is durable, stable, anti-wearable, no need to change the wear steel plate in lifetime of the baler machine, and further more, the World famous brand wear plate Hardox 450 is optional, more options for your choice.
    

> How long is the non-load cycle time of Aluminum Cans Industrial Compactor?
The single non-load cycle time is approx. 60-120 seconds, and we can make it faster or lower according to your requirement, such as 30 seconds one bale, or 180 seconds for one bale.
    

> What are the power requirements for Hydraulic Press Compactor Metal Scrap Baler Machine?
For the power requirement of our baler machine, 3 phases power supply is necessary, and for thickness of wire, it depends on how many kw will the baler machine use, you need to prepare the wire per our engineer's suggestion.