> Does Metal Scrap Wires Baling Machine need any foundation installation?

For small baler, just put it on the horizontal cement ground, that is OK, and for heavy duty baler, then need a foundation, we will send you a foundation drawing before you install the baler.
    

> What is cooling system of Aluminum Can Recycling Baler Machine?
Normally speaking, for the cooling of baler, we have 2 types of cooling system, one is water cooling, this cooling system is economical and easy to achieve cooling effect, and another type is industrial chiller which have better cooling effect than waste cooling, oil chiller cover small space, but price is just a little high than water cooling.
    

> What kind of materials can be compressed by Scrap Steel Compactor Machine?
The baler can press various of ferrous metal scrap such as light metal scrap, metal swarfs, steel chips etc and non ferrous metal scrap such as copper scrap, aluminium scrap, stainless steel scrap etc; you can send some photos and videos of material which do you want to compress, then will check with our general engineer, and will suggest you suitable baler accordingly.
    

> What are common maintenance issues with Tcm Cans Tins Baling Machine？
The common maintenance issues for the baler listed as below: 1. Clear the area of bale out every day, Inspect if have materials on the limit switch, if yes, please clear the materials, Clear the area around the machine every day, Inspect if any oil leakage from connects or cylinders.; 2. Week Inspection, Inspect all the connects and watch if loose or not, if loose, please tighten the connects timely, Inspect all the screws and watch if loose or not, if loose, please tighten the screws timely，Inspect if have materials on the piston rod, if have, please remove timely, Inspect the oil level and watch if it is on the indicated position; 3.Annual Inspection, Filter the hydraulic oil within 6 months from the beginning of the machine running, Change or filter the hydraulic oil every year, Clear the oil tank totally every year, Use sieve with more than 100 mesh when filtering the hydraulic oil.
    

> What is output capacity of Compacting Aluminum Cans Baler?
The baler capacity ranges from 300kg per hour to 30000kg per hour, different models has different capacity, small models has small output capacity, and bigger one has big capacity accordingly, we also can customize the baler according to your special requirement.
    

> What all do I need to install the Metal Scrap Heavy Duty Hydraulic Baler?
After the baler arrived your place, you need to prepare the hydraulic oil, cable wire, worker, electrical technician, then you can start to test and operate the baler machine per user manual, or make video call with our engineer, our technical team will guide and help you get everything done.