> How much would Copper Flakes Granules Briquetting Press Baler, its installation, and training cost me?
The installation and training cost will not be so much, for some small briquette press, the machine will not be disassembled when shipping, so you just need to put it on the horizontal ground, connect to the power supply and add hydraulic oil, that is OK, for big briquette press, we will make good marks when disassembling when shipment, you just need to assemble the briquette press per marks, then install, operate and maintain the briquette press per user manual, that is Ok, and let us know if you have any problems when installing, operating and maintaining.
    

> How to choose your Aluminium Shavings Briquette Press baler correctly?
As for this issues, first, you need to know which model of the briquette press will you need, then you can compare price, quality, services of the briquette press machine from different suppliers, and at last you will know which supplier is better.
   

> How can i know you are a manufacturer or trader of Vertical High Pressure Aluminum Shavings Briquette Machinery?
 You can visit our factory personally, also you can ask technical drawings such as 2D drawings 3D Drawings, we have professional technical team working on this, and will not give you these if a trader, because they don't have ability on this.
    

> How long is the non-load cycle time of Copper Wire Granules Briquetting Press?
The single non-load cycle time is approx. 20-30 seconds, and we can make it faster or lower according to your requirement, such as 10 seconds one bale, or 40 seconds for one bale.
    

> What are the different types of Waste Iron Chip Block Making Machine?
The briquette press has many types such as horizontal type, vertical type, small type, integrated type, double briquette out type, single briquette out type, we have different types of briquette press according to your materials and output capacity.
    

> How can we install the High Efficiency Metal Chip Briquetting Machine?
The briquette press is marked tips when shipping, and you can easily assemble the machine per the tips, after assembling, put it on the horizontal ground, adding hydraulic oil, connect to the power supply, then test and operate the machine per user manual, that is OK, if you have any questions, you can contact with us any time.