> What are the power requirements for Steel Swarf Briquette Press?
For the power requirement of our briquette press machine, 3 phases power supply is necessary, and for thickness of wire, it depends on how many kw will the briquette press machine use, you need to prepare the wire per our engineer's suggestion.
    

> Does Iron Chip Briquetting Machine Brass Chip Briquette Press need any foundation installation?
For small briquette press, just put it on the horizontal cement ground, that is OK, and for heavy duty briquette press, then need a foundation, we will send you a foundation drawing before you install the briquette press.
    

> How does Metal Chips Briquetting Press With Ce Certificate work?
The briquette press is driven by hydraulic power to press all kinds of ferrous and non ferrous metal scrap chips into high density bale, easy to transport, save labor cost and storage cost, improve melting rate and make more profits.
    

> Can I get a local engineer for Verticle Briquette Machine For Aluminium Scrap installation?
As for the installation, you can find a local engineer to install the machine, we will make detail marks on the machine, and we have video, photos and user manual for the machine, you just need to install the machine per the marks and user manual when machine arrived at your site, that is OK; Further more, we can send our engineer to your place to help you to install the machine, you just need to pay salary for our engineers, and you can contact with us any time if any problems, our after sale team will give you suitable solutions accordingly.
    

> How to install Steel Chip Metal Powder Briquette Machine?
For small briquette press , we will not disassemble it when shipping, you just need to add hydraulic oil and connect to the electrical power, then operate per user manual, that is OK, for bigger one, we will make detail marks when disassembling the machine, you just only need to assemble the machine per marks, that is alright; and you can contact with our technical team when you have any problems.
    

> How can i know you are a manufacturer or trader of Vertical Briquetting Press Machine For Brass Chips?
 You can visit our factory personally, also you can ask technical drawings such as 2D drawings 3D Drawings, we have professional technical team working on this, and will not give you these if a trader, because they don't have ability on this.