> Is there any spare parts along with the Copper Scrap Shavings Briquetting Machine?
Yes, we will provide some spare parts for free which includes tools, O Rings and some other electrical components like middle relay, and you need to pay extra cost for wear parts.
    

> Is your price of Hydraulic Aluminum Briquette Making Machine competitive?
Yes, of course, our price is competitive, our price is cheaper than other suppliers such as tf briquette press, eco briquette press, wanshida briquette press, tcm briquette press, enerpat briquette press etc.. Because we are direct manufacturer of the briquette press machine, so we can promise the quality of the briquette press machine, and price is lower.
    

> Do you provide video support of Iron Briquetting Machine Scrap Copper Chip Briquette Press?
Yes, of course, we are providing the video support which includes installing the briquette press, debugging, testing, operating the machine, we also can guide you to replace parts and maintenance via video call.
    

> Can I get a local engineer for Hydraulic Aluminum Sawdust Chips Briquetter installation?
As for the installation, you can find a local engineer to install the machine, we will make detail marks on the machine, and we have video, photos and user manual for the machine, you just need to install the machine per the marks and user manual when machine arrived at your site, that is OK; Further more, we can send our engineer to your place to help you to install the machine, you just need to pay salary for our engineers, and you can contact with us any time if any problems, our after sale team will give you suitable solutions accordingly.
    

> What are common maintenance issues with Brozne Borings Brass Chips Briqeutting Press Baler? 

The common maintenance issues for the briquette press listed as below: 1. Clear the area of bale out every day, Inspect if have materials on the limit switch, if yes, please clear the materials, Clear the area around the machine every day, Inspect if any oil leakage from connects or cylinders.; 2. Week Inspection, Inspect all the connects and watch if loose or not, if loose, please tighten the connects timely, Inspect all the screws and watch if loose or not, if loose, please tighten the screws timely，Inspect if have materials on the piston rod, if have, please remove timely, Inspect the oil level and watch if it is on the indicated position; 3.Annual Inspection, Filter the hydraulic oil within 6 months from the beginning of the machine running, Change or filter the hydraulic oil every year, Clear the oil tank totally every year, Use sieve with more than 100 mesh when filtering the hydraulic oil.