> How much would Y83 Series Aluminum Chips Briquette Press Machine, its installation, and training cost me?
The installation and training cost will not be so much, for some small briquette press, the machine will not be disassembled when shipping, so you just need to put it on the horizontal ground, connect to the power supply and add hydraulic oil, that is OK, for big briquette press, we will make good marks when disassembling when shipment, you just need to assemble the briquette press per marks, then install, operate and maintain the briquette press per user manual, that is Ok, and let us know if you have any problems when installing, operating and maintaining.
   

> What are common maintenance issues with Waste Iron Chip Briquette Machine? 

The common maintenance issues for the briquette press listed as below: 1. Clear the area of bale out every day, Inspect if have materials on the limit switch, if yes, please clear the materials, Clear the area around the machine every day, Inspect if any oil leakage from connects or cylinders.; 2. Week Inspection, Inspect all the connects and watch if loose or not, if loose, please tighten the connects timely, Inspect all the screws and watch if loose or not, if loose, please tighten the screws timely，Inspect if have materials on the piston rod, if have, please remove timely, Inspect the oil level and watch if it is on the indicated position; 3.Annual Inspection, Filter the hydraulic oil within 6 months from the beginning of the machine running, Change or filter the hydraulic oil every year, Clear the oil tank totally every year, Use sieve with more than 100 mesh when filtering the hydraulic oil.
   

> How much is the shipping cost of Waste Scrap Copper Chip Briquetting Press?
The shipping cost is varying over time,and different models of briquette press machine will need different containers to hold, if peak season and bigger models, the shipping cost will be higher, and on the contrary, the cost will be lower.
   

> How to install Brass Shavings Briquetting Machine?
For small briquette press , we will not disassemble it when shipping, you just need to add hydraulic oil and connect to the electrical power, then operate per user manual, that is OK, for bigger one, we will make detail marks when disassembling the machine, you just only need to assemble the machine per marks, that is alright; and you can contact with our technical team when you have any problems.
   

> What is payment term of Metal Chips Copper Turning Briqudetting Press?
The payment of the briquette press  is 30% TT as deposit, and 70%TT balance paid 7 days before shipment, and LC is also acceptable, it is flexible depends on amount of the briquette press machine.
   

> What are the advantages of Scrap Chips Copper Briquetting Press?
Summary advantages of the briquette press: 1. Logistics & Space:Reduces volume by up to 90%; Creates stackable, uniform blocks; Frees up storage space.2.Economic: Lowers transportation and handling costs; Commands a higher price from scrap yards.3. Safety: Eliminates sharp edges and loose, shifting piles; Reduces fire risk.4.Operational Efficiency:Creates a cleaner workspace; Enables automation; Standardizes handling.5.Environmental:Promotes recycling; Contains fluids; Lowers transportation emissions.In conclusion, a briquette press is not just a machine for compressing scrap; it's a strategic investment that improves a company's bottom line, operational safety, and environmental footprint by turning a problematic waste material into a clean, dense, and valuable product.