> What is warranty time of the Scrap Metal Chips Briquetting Press?
The warranty time of the briquette press machine is 12 months normally, also can you can pay extra fees for more times such as 24 months or 36 months, within the warranty time, we are responsible for the briquette press machine except the spare parts.
   

> How to operate Metal Chip Iron Powder Briquetting Machine?
This briquette press is very simple, we set all parameters well before delivery, just operate per user manual is OK, you can contact with us if you have any questions any time, we can guide you how to operate the briquette press.
   

> Where to find cheap Aluminium Turnings Compression Briquetting Machine?
You can search the briquette press which you want in the Google, then you will find many suppliers who have this kind of briquette press, then you need to make some comparisons of these suppliers, then you can find good supplier with lower prices; also you can attend some international and local exhibitions which are related to the briquette press;also can inquire your local agents or dealers to find economical and suitable briquette press with best quality.
   

> How about shipping fees for Scrap Metal Chip Briquetting Compresser?
The shipping fees are different, it depends on what kind of briquette press will you need and which destination port will arrive at, for small briquette press, will use LCL Shipment and the shipping fees will be lower; for big briquette press machine, will use full container, the fees will be higher, In a word, the shipping fees are different according to different destination port and different model of briquette press, will send you details shipping fees after checking with our forwarder, or you can check with your own forwarder.
   

> What kind of materials can be briquetted by Aluminium Borings Compress Briquette Machine?
The briquette press can press various of metal chips such as iron chips, metal chips, metal powder, aluminium chips, copper chips, brass chips, lead chips etc... You can send some photos and videos of material which do you want to compress, then will check with our general engineer, and will suggest you suitable briquette press accordingly.
   

> What are common maintenance issues with Automatic Scrap Copper Chip Briquetting Press? 

The common maintenance issues for the briquette press listed as below: 1. Clear the area of bale out every day, Inspect if have materials on the limit switch, if yes, please clear the materials, Clear the area around the machine every day, Inspect if any oil leakage from connects or cylinders.; 2. Week Inspection, Inspect all the connects and watch if loose or not, if loose, please tighten the connects timely, Inspect all the screws and watch if loose or not, if loose, please tighten the screws timely，Inspect if have materials on the piston rod, if have, please remove timely, Inspect the oil level and watch if it is on the indicated position; 3.Annual Inspection, Filter the hydraulic oil within 6 months from the beginning of the machine running, Change or filter the hydraulic oil every year, Clear the oil tank totally every year, Use sieve with more than 100 mesh when filtering the hydraulic oil.