> What briquette size does the Swarf Metal Chips Briquette Press produce?
We can customize the briquette diameter size per your requirement, also you can tell us your requirement, we can suggest you suitable bale size accordingly.
   

> What is Aluminium Turnings Briquetting Press?
The briquette press is mainly used to briquette all kinds of metal chips such as metal chips, steel chips, metal powder, iron powder, aluminium chips, aluminium powder, copper chips, copper powder, copper granules, copper flakes, brass chips, brass swarfs and other metal chips into high density of briquette, easy to transport and stock, save transport cost, storage cost, convenient for recycling center or steel manufacturer to melt again, improve the rate of steel melting, make more profits by using briquette press.
   

> How to install Iron Scrap Chips Briquette Making Machine?
For small briquette press , we will not disassemble it when shipping, you just need to add hydraulic oil and connect to the electrical power, then operate per user manual, that is OK, for bigger one, we will make detail marks when disassembling the machine, you just only need to assemble the machine per marks, that is alright; and you can contact with our technical team when you have any problems.
   

> How long is the non-load cycle time of China Scrap Brass Powder Briquette Machine?
The single non-load cycle time is approx. 20-30 seconds, and we can make it faster or lower according to your requirement, such as 10 seconds one bale, or 40 seconds for one bale.
   

> How much is the shipping cost of Steel Chips Copper Shavings Briquetting Press?
The shipping cost is varying over time,and different models of briquette press machine will need different containers to hold, if peak season and bigger models, the shipping cost will be higher, and on the contrary, the cost will be lower.
   

> Does the installation of Scrap Metal Chip Copper Powder Briquetting Press Machine require drilling and bolting into the floor or can stand without drilling?
Regarding the drilling or not, it depends on the type of briquette press, for vertical briquette press machine, most of vertical baling machine needs drilling and bolting, because it is vertical type, and weight center of the machine is high; and for horizontal briquette press, it no need foundation, drilling and bolting, just put it on horizontal cement ground with thickness more than 150mm.