> What are the power requirements for Iron Briquetting Machine Scrap Copper Chip Briquette Press?
For the power requirement of our briquette press machine, 3 phases power supply is necessary, and for thickness of wire, it depends on how many kw will the briquette press machine use, you need to prepare the wire per our engineer's suggestion.
    

> How long is the non-load cycle time of Metal Sawdust Briquetting Press?
The single non-load cycle time is approx. 20-30 seconds, and we can make it faster or lower according to your requirement, such as 10 seconds one bale, or 40 seconds for one bale.
    

> Does the installation of Steel Shaving Copper Chips Briquetting Press require drilling and bolting into the floor or can stand without drilling? 

Regarding the drilling or not, it depends on the type of briquette press, for vertical briquette press machine, most of vertical baling machine needs drilling and bolting, because it is vertical type, and weight center of the machine is high; and for horizontal briquette press, it no need foundation, drilling and bolting, just put it on horizontal cement ground with thickness more than 150mm.
    

> What is voltage of Aluminum Chips Briquette Press machine?
For the voltage of the machine, no need to worry about that, we will customize the motor per your local voltage and frequency, and the important thing that the briquette press machine must need 3 phases electrical power supply.
    

> What is the electricity supply of  High Quality Scrap Metal Copper Chip Briquetting Press needed, single or three phase?
The electricity supply of the briquette press is 3 phases, for the voltage, we can customize the motor voltage per your local voltage.
   

> How about shipping fees for Metal Shavings Brass Chips Briquetting Press?
The shipping fees are different, it depends on what kind of briquette press will you need and which destination port will arrive at, for small briquette press, will use LCL Shipment and the shipping fees will be lower; for big briquette press machine, will use full container, the fees will be higher, In a word, the shipping fees are different according to different destination port and different model of briquette press, will send you details shipping fees after checking with our forwarder, or you can check with your own forwarder.