> Can i request a free test for Metal Scraps Chips Briquetting MachineBefore order?
Surely no problem, you can send some materials which you want to handle to our factory to test your materials, or we can find some materials which are similar to your materials, will take videos and photos when testing and then send the videos/photos to you for your inspection.
    

> What are common maintenance issues with Metal Chip Briquetting Press Low Trouble? 

The common maintenance issues for the briquette press listed as below: 1. Clear the area of bale out every day, Inspect if have materials on the limit switch, if yes, please clear the materials, Clear the area around the machine every day, Inspect if any oil leakage from connects or cylinders.; 2. Week Inspection, Inspect all the connects and watch if loose or not, if loose, please tighten the connects timely, Inspect all the screws and watch if loose or not, if loose, please tighten the screws timely，Inspect if have materials on the piston rod, if have, please remove timely, Inspect the oil level and watch if it is on the indicated position; 3.Annual Inspection, Filter the hydraulic oil within 6 months from the beginning of the machine running, Change or filter the hydraulic oil every year, Clear the oil tank totally every year, Use sieve with more than 100 mesh when filtering the hydraulic oil.
    

> What is pressing force of Used Aluminum Chip Briquetting Machine?
The pressing force of the  briquette press is different depends on different models, smaller machine has small pressing force, and bigger machines has big pressing force; and it is also determined by the material characteristics and bale density, our technical team will figure out and calculate the pressing force according to your requirements.
    

> What is Aluminium Shavings Briquettes Machine?
The briquette press is mainly used to briquette all kinds of metal chips such as metal chips, steel chips, metal powder, iron powder, aluminium chips, aluminium powder, copper chips, copper powder, copper granules, copper flakes, brass chips, brass swarfs and other metal chips into high density of briquette, easy to transport and stock, save transport cost, storage cost, convenient for recycling center or steel manufacturer to melt again, improve the rate of steel melting, make more profits by using briquette press.
    

> Are you a manufacturer or a trader of Hydraulic Scarp Brass Chins Briquetting Machine?
We are true manufacturer of briquette press machine, we have our own technical team, R&D team, have many processing machines,we can have a video meeting to tour our factory, and also you are warmly welcome to visit our factory personally.
    

> Are the interchangeable wear plate installed on Steel Chip Metal Powder Briquette Press Machine?
Yes, the wear steel plate is changeable, you can easily change it when which wear plate is going to change.